| Excavator Bearing 200BA27V 200x270x33mm | Support Type:Round Flange; Ca - Axial Load Rating:8588 lbf; Bearing Type:Split Cylindrical Re; Series Type:Medium Series; Cor - Static Load Rating:157366 lbf; Dimension L:8.1 in; Cr - Dynamic Load Rating:118025 lbf; Seal Type:Felt Seal; Bearing Number:MSE411BR; Dimension V:0.1 in; |
| 640*902*82mm Excavator Parts Slew Rings DH80-GO | Bearing Weight:13.80 Kg; Ab - Cage-Cone Frontface Clearance:4.3 mm; db - Cone Backface Backing Diameter:280.92 mm; Db - Cup Backface Backing Diameter:322.07 mm; Series:M349500; R - Cone Backface To Clear Radius1:6.35 mm; Cage Type:Stamped Steel; a - Effective Center Location3:2.5 mm; Cg - Geometry Factor:0.147; B:57.150 mm; |
| BA180-4WSA Excavator Bearings M-anufacturer 180x250x33mm | D:100 mm; da max:61 mm; da min:53 mm; Mass:0.96 kg; Min operating temperature, Tmin:-20 °C; d:45 mm; Ce min:5 mm; Nlim (grease):6,000 rpm; ra max:1.5 mm; B:25 mm; |
| AC463240 Excavator Bearing Angular Contact Ball Bearing 230X320X40mm | SW:3.97 mm; B1:51.1 mm; C0:15.2 kN; B2:17.5 mm; d:31.75 mm; C1:5.8 mm; D:72 mm; m:6.5 mm; C:20 mm; d1:51.1 mm; |
| NK38x52x27 Needle Roller Bearing / Excavator Bearing 38*52*27mm | ra max:1.5 mm; Dynamic load, C:60.5 kN; Fatigue limit load, Cu:2.24 kN; Da max:137 mm; D:145 mm; Characteristic outer ring frequency, BPF0:6.56 Hz; d:95 mm; Nlim (grease):4,500 rpm; da min:103 mm; Mass:1.08 kg; |
| SF3235PX1 Excavator Walk Bearing 260x330x35mm | Dimension M:130 mm; Dimension L:445 mm; Cr - Dynamic Load Rating:71040 lbf; Series Type:Light Series; Bearing Type:Split Cylindrical Ex; Pillow/Plummer Block Style:Split Cylindrical Ho; Dimension H:150 mm; Shaft Size:115 mm; Dimension H2:310 mm; Bearing UPC:013992028051; |
| CAT225 Catpillar Excavator Accessories Bearing | Dynamic load, C:6 kN; ra max:0.8 mm; Nlim (grease):21,000 rpm; d:15.88 mm; Da max:30.4 mm; da min:20.4 mm; Radial clearance class:CN; Mass:0.03 kg; Min operating temperature, Tmin:-20 °C; Max operating temperature, Tmax:120 °C; |
| BA246-1A Excavator Bearing 246x308x32mm | Locating Rings (width x OD):SR130X12.5; G:M12; N1:20.00 mm; Seal Type:Labyrinth; Max Grease Speed:4200; Shaft Diameter d:55 mm; A1:80 mm; C1 Dynamic Load Rating:225; UPC Code:999999999; H:156.00 mm; |