| SH200C2 1093*1330*102mm Ball Rings | Seal Type:Viton Single Lip; Series Type:Medium Series; Bearing Number:MSE715BX; Support Type:Round Flange; Shaft Size:7-15/16 in; Dimension R:22.5 in; Maximum Speed:960 rpm; Cr - Dynamic Load Rating:227732 lbf; Dimension N:19.375 in; Dimension V:0.2 in; |
| BD155-6 Excavator Bearing 155x198x48mm | Holder Surface Treatment:Electroless Nickel P; Bearing Material:[Steel] Steel; Volume Discount:Available; Days to Ship:8 Days; RoHS:6; Bearing Used:Deep Groove Ball Bea; Bearing I.D. d(mm):35; Flange O.D. H(φ):126; Number of Bearings:Single; Type:Bearings with Housin; |
| 210BA29V Excavator Walk Bearing 210x295x35mm | S:8 mm; L3:57 mm; H1:89 mm; N1:16 mm; T max.:100 °C; Z:70.6 mm; Recommended tightening torque for set screw:8.3 Nm; H2:56 mm; SW:4 mm; B1:35.7 mm; |
| BA200-7B Excavator Bearing 200x250x24mm | e:19 mm; Dz:70 mm; s1:15 mm; A:32.1 mm; A2:41 mm; C:19.5 kN; G:R1/8"; Designation of housing:FLE206N-; L:80 mm; T max.:100 °C; |
| 206.25.00200 Slewing Bearing | Static load, C0:36 kN; Characteristic cage frequency, FTF:0.41 Hz; Min operating temperature, Tmin:-25 °C; da max:75 mm; Max operating temperature, Tmax:110 °C; Characteristic inner ring frequency, BPFI:5.92 Hz; B:22 mm; Characteristic rolling element frequency, BSF:5.26 Hz; Characteristic outer ring frequency, BPF0:4.08 Hz; Radial clearance class:CM; |
| BA230-2 Excavator Bearing 230x320x40mm | Cup Part Number:LL521810; Y - ISO Factor3:1.53; Series:LL521800; Db - Cup Backface Backing Diameter:5.31 in; Design Units:Imperial; Da - Cup Frontface Backing Diameter:5.43 in; D:5.5938 in; Cg - Geometry Factor:0.118; C - Cup Width:0.4688 in; e - ISO Factor2:0.39; |
| SF4615 PX1 Excavator Bearing 230*300*35mm | Min operating temperature, Tmin:-25 °C; d:20 mm; Characteristic outer ring frequency, BPF0:3.08 Hz; Characteristic inner ring frequency, BPFI:4.92 Hz; Max operating temperature, Tmax:110 °C; Dynamic load, C:12.8 kN; Static load, C0:6.65 kN; da min:25 mm; rs min:1 mm; D:47 mm; |
| AC4630 Excavator Walk Bearing 230x300x35mm | Ab - Cage-Cone Frontface Clearance:9.9 mm; e - ISO Factor8:0.73; Aa - Cage-Cone Backface Clearance:20.1 mm; Series:HH932100; Cone Part Number:HH932145; Design Units:Imperial; D:311.15 mm; d:146.050 mm; Cg - Geometry Factor:0.133; K - Factor7:0.8; |